Product information:

Product instructions:

This product is generally used in a group of 4, and each shock absorber is charged and deflated separately.

Install the four shock absorbers on the customer's support through the through holes at the bottom or other ways, and distribute them at the four corners as a whole.

The heavy objects to be damped shall be stably lifted and placed on it. The heavy objects shall be in good contact with the main bearing surface of each shock absorber and the ejector rod for venting, and the pressure gauge and inflation port shall face outward.

After unscrewing the inflation nozzle cap, each shock absorber can be inflated separately with domestic manual air pump, vehicle mounted inflation pump and other air sources. The inflation pressure range and airbag safety rise range are shown in the table above.

Height adjustment: when the four shock absorbers are used together, raise the floating height of the shock absorber by pumping air or releasing the gas of the diagonal or opposite shock absorber; Reduce the floating height of the shock absorber by deflating or inflating the diagonal or opposite shock absorber; (remember not to inflate and deflate a lot before making clear the rules. You can try a little inflate and deflate first). Manually lift up the ejector rod for venting. This air cushion shock absorber is similar when used alone.

Note: it is forbidden to expose this product to the sun, touch the airbag with sharp objects and avoid being contaminated with oil.