Product introduction:
1. Zhonggongshike laser level sends a straight line from the object surface and can be at any angle. It is suitable for woodworking, stair starting board, shelf, forming, tile laying, curtain installation, wall hanging painting or any other work requiring accurate alignment.
2. The horizontal accuracy of laser beam is 0.25mm/m, the vertical accuracy is 0.5mm/m, the light wave is 650nm-680nm, the output power is 5MW, the illumination range is 20m, and the indoor illumination range is 6-8m during the day.
3. There are three beam route modes: cross, horizontal and vertical. Customers can adjust the laser head up and down according to their needs.
Product features:
1. Cross laser measures whether many objects are on the same line.
2. Three air bubble water leveler is used for accurate plane or vertical alignment.
3. The ruler function of the left and right sides of the level.
4. With 250mm circle ruler, it is more convenient to measure distance.
usage method:
1. Place or replace the battery: unscrew the bottom screw, open the battery cover, take out the battery, replace three AG13 batteries, and ensure that the positive and negative poles of the battery are placed correctly.
2. Turn on the red button laser switch, you can make lines horizontally or vertically, or arbitrarily. If necessary, you can put the level ruler on the tripod to achieve the purpose of convenient use and more accuracy.
3. On the horizontal plane, three horizontal beads on the laser level can be positioned horizontally.
4. Push the lock / unlock key at the tail to lock the pull-out length of the tape measure.
Four functions of zhonggongshike laser level gauge:
1. The laser level can measure whether the plane is uneven or hanging pictures, etc. lv03 laser level can make three kinds of lines: straight line, cross line and solid line (also known as corner line).
2. There are horizontal beads on the laser level gauge, which can measure whether the horizontal plane is horizontal. Lv03 laser level gauge also has a water bead measuring an angle of 45 degrees.
3. A circle ruler (2.5m circle ruler with inch scale) is attached to the laser level.
4. There is a scale (15cm, 6 inches) on the edge of lv03 laser level.