Infrared (IR) ultraviolet (UV) laser detection card
Infrared (IR) ultraviolet (UV) laser detection card
Infrared laser detection card (board), also known as infrared up conversion card, frequency multiplier, infrared detection card and imaging card, can convert various invisible near-infrared band beams into visible light, effectively realize the detection, tracking, calibration and identification of infrared beams, and can be used for near-infrared light detection of various semiconductor lasers, light tracking emitted by infrared light-emitting diodes YAG and other large laser beam calibration, optical fiber communication signal detection and other fields. The infrared detection board is made of up conversion luminescent materials. The powder or ceramic and glass blocks with particle size of 04pm ~ 50pm can be lit up by using 03mw infrared light source. The effective light excitation band is mainly 700nm ~ 10600nm. The same detection board can identify infrared lasers in different bands. The emission intensity is proportional to the excitation power of infrared devices. The products include paperboard, plastic, glass The area, shape, size and color of metals, ceramics, etc.
HGISL080 Integrating sphere light source
HGISL080 Integrating sphere light source
Application of integrating sphere uniform light source system: it is used for the calibration of imaging systems and devices in the laboratory.
Integrating sphere is a hollow sphere whose inner wall is coated with white diffuse reflective material, also known as photometric sphere, luminous flux sphere, etc. One or several window holes are opened on the ball wall as light inlet holes and receiving holes for placing light receiving devices. The inner wall of the integrating sphere is a good sphere, and its deviation from the ideal sphere is usually required to be no more than 0.2% of the inner diameter. The inner wall of the ball is coated with ideal diffuse reflection material, that is, the material with diffuse reflection coefficient close to 1. The commonly used material is barium sulfate, which is evenly mixed with colloidal adhesive and sprayed on the inner wall. The spectral reflectance of barium sulfate coating in the visible spectrum range is more than 99%. In this way, the light entering the integrating sphere is reflected many times through the inner wall coating to form a uniform illumination on the inner wall.
Basic principle of integrating sphere:
The light is collected by the integrating sphere through the sampling port, and is evenly scattered in the integrating sphere after multiple reflections. When the integrating sphere is used to measure the luminous flux, the measurement result can be more reliable. The integrating sphere can reduce and eliminate the measurement error caused by the shape of the light, the divergence angle and the response difference at different positions on the detector.
ZGPM2000 Multifunctional photometer
ZGPM2000 Multifunctional photometer
Fast measurement speed, high precision, stable and reliable performance;
Touch screen LCD display, direct reading test data;
According to different requirements, different photometric parameters can be switched and measured;
USB communication interface supporting software, program-controlled online measurement;
RS232 communication interface is convenient for customers' secondary development and application.
HGMFS1 Spatial filter
HGMFS1 Spatial filter
Product features:
Equipped with standard microscope objective lens base and pinhole base;
The micro objective lens base is adjusted with a micrometer head, which can continuously and quantitatively adjust the distance between the objective lens and the pinhole;
The guide rail adopts precision linear ball guide rail pair, which has comfortable movement and high precision;
The pinhole seat consists of two m6x025 fine tooth screws to accurately adjust the pinhole position in two dimensions.
Product functions:
The main purpose of this product is to restore the laser beam that affects the energy distribution due to the defects of the passing optical devices and the scattering of particles in the air during the transmission process through the combination of micro objective lens and pinhole. This is very important for optical experiments and related research, especially in the field of holography and optical data processing. When used, the spatial filter is placed in the optical path, so that the laser beam is injected into the microscopic objective lens, and the spatial filter is adjusted to make the beam reflected from the microscopic objective coincide completely with the incident light beam. Then, the position of the pinhole and the distance between the objective lens and the pinhole are adjusted, so that the beam is accurately focused on the pinhole, that is, the adjustment is completed.
HGILM3 Standard mercury lamp light source
HGILM3 Standard mercury lamp light source
HGILM3 Standard mercury lamp light source:
Weight: 0.45kg, power: 3W
Cold cathode low-pressure mercury discharge lamp can be used for wavelength calibration of various monochromators. It has its own power supply, small volume, long service life, convenient use, large spectral energy and good stability.
HGILM5 Standard mercury lamp light source
HGILM5 Standard mercury lamp light source
HGILM5 Standard mercury lamp light source:
Power: 5W, cold cathode low-pressure mercury discharge lamp, which can be used for wavelength calibration of various monochromators. Imported pen mercury lamp and power supply have good stability and long service life. After 5000 hours of continuous use, the output brightness decreases by less than half.